Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
French

Translating step 8

Step 8
Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case. Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.
  • Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.

Retirez la nappe de la vitre tactile et utilisez l'extrémité plate d'un spudger pour décoller l'adhésif fixant la nappe au boîtier arrière en aluminium.

Your contributions are licensed under the open source Creative Commons license.