Replace dust container lid

Step 1 — Plug broken off at the lid

As you can see, the plug on the lid, which was still attached, broke off - so the vacuum cleaner is no longer easy to use. I fixed it provisionally with some adhesive tape, but it didn't last long, because when I emptied the dust container, dust got stuck to the adhesive tape again...

Step 2 — Preparations - Remove battery and filter

We don't screw anything, but I would still recommend removing the battery during the repair.

Step 3 — Remove the old lid

Please take absolute care here so that the lid holder on the dust container does not break off - otherwise it will be expensive!

Step 4 — Insert new lid

Now insert the new cover. It should snap into place with a little pressure. Again, first on one side - then the other.