Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
Japanese

Translating step 2

Step 2
Flip up the retaining flap on the LCD ribbon cable ZIF connector. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.
  • Flip up the retaining flap on the LCD ribbon cable ZIF connector.

  • Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

LCDリボンケーブルのZIFコネクタ上の固定フラップを跳ね上げます。

指やピンセットを使って、ロジックボード上のソケットからLCDリボンケーブルを引っ張ります。

Your contributions are licensed under the open source Creative Commons license.