Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
Spanish

Translating step 2

Step 2
Flip up the retaining flap on the LCD ribbon cable ZIF connector. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.
  • Flip up the retaining flap on the LCD ribbon cable ZIF connector.

  • Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

Levante la aleta de retención en el conector ZIF del cable de cinta LCD.

Con los dedos o un par de pinzas, tire del cable plano LCD de su toma en la placa lógica.

Your contributions are licensed under the open source Creative Commons license.