Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
German

Translating step 2

Step 2
Flip up the retaining flap on the LCD ribbon cable ZIF connector. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.
  • Flip up the retaining flap on the LCD ribbon cable ZIF connector.

  • Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

Klappe den Halteb├╝gel am ZIF Verbinder des LCD Flachbandkabels hoch.

Du kannst das LCD Flachbandkabel mit den Fingern oder einer Pinzette aus seinem Sockel auf dem Logic Board herausziehen.

Your contributions are licensed under the open source Creative Commons license.