Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Dutch

Translating step 2

Step 2
Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad. Rotate the LCD along its left edge and lay it down on top of the front glass panel. Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.
  • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

  • Rotate the LCD along its left edge and lay it down on top of the front glass panel.

  • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.