Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Spanish

Translating step 1

Step 1
Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame. The bottom left screw is obscured by the home button ribbon cable connector. Carefully move the home button ribbon cable aside to remove the bottom left screw.
  • Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

  • The bottom left screw is obscured by the home button ribbon cable connector. Carefully move the home button ribbon cable aside to remove the bottom left screw.

Retire los cuatro tornillos Phillips # 00 de 2 mm que sujetan la pantalla LCD al marco de aluminio.

El tornillo inferior izquierdo está oscurecido por el conector del cable de cinta del botón de inicio. Con cuidado, mueva el cable de cinta del botón de inicio a un lado para quitar el tornillo inferior izquierdo.

Your contributions are licensed under the open source Creative Commons license.