Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
French

Translating step 4

Step 4
Use the tip of a spudger to peel back the piece of foam tape covering the optical drive thermal sensor. Use the flat end of a spudger to carefully pry the thermal sensor up off the adhesive securing it to the optical drive.
  • Use the tip of a spudger to peel back the piece of foam tape covering the optical drive thermal sensor.

  • Use the flat end of a spudger to carefully pry the thermal sensor up off the adhesive securing it to the optical drive.

  • If you have a disk or anything else stuck inside your optical drive, we have a guide to fix it.

À l'aide de la pointe d'un spudger, décollez le morceau de ruban mousse qui recouvre le capteur thermique du lecteur optique.

À l'aide de l'extrémité plate d'un spudger, faites doucement levier sur le capteur thermique pour le décoller de la bande adhésive par laquelle il est fixé sur le capteur optique.

Your contributions are licensed under the open source Creative Commons license.