Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Italian

Translating step 2

Step 2
Remove the two T10 Torx screws from both sides of the optical drive (four screws total). Remove the two T10 Torx screws from both sides of the optical drive (four screws total).
  • Remove the two T10 Torx screws from both sides of the optical drive (four screws total).

Rimuovi le due viti Torx T10 da entrambi i lati dell'unità ottica (quattro viti in totale).

Your contributions are licensed under the open source Creative Commons license.