Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools


Sostituzione dell'unità ottica dell'iMac Intel EMC 2308 da 21,5"

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief 1-2 sentence summary will appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      Pull the optical drive thermal sensor connector straight away from its socket on the logic board.

      Step 2

      Rimuovere le due viti Torx T10 da entrambi i lati dell'unità ottica, per un totale di quattro viti.

      Step 3

      Lift the inner edge of the optical drive and maneuver its connector past the frame attached to the logic board.

      Step 4

      Use the flat end of a spudger to help disconnect the optical drive cable.

      Your contributions are licensed under the open source Creative Commons license.