Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

English
Spanish

Translating step 7

Step 7
Pull the keyboard cable up from the logic board, holding the cable as close to the connector as possible.
  • Pull the keyboard cable up from the logic board, holding the cable as close to the connector as possible.

  • Make sure that you reconnect the keyboard cable before replacing the RAM shield.

Tire del cable del teclado hacia arriba desde la placa lógica, sosteniendo el cable lo más cerca posible del conector.

Asegúrese de volver a conectar el cable del teclado antes de reemplazar el protector de RAM.

Your contributions are licensed under the open source Creative Commons license.