Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 24 guides that include this step.

English
German

Translating step 2

Step 2
Slightly lift the top edge of the display out of the outer case.
  • Slightly lift the top edge of the display out of the outer case.

  • Do not lift it too much. There are several cables attaching the display to the logic board.

Hebe die Oberkante des Displays leicht aus dem äußeren Gehäuse.

Hebe es nicht zu weit hoch. Mehrere Kabel verbinden das Display noch mit dem Logic Board.

Your contributions are licensed under the open source Creative Commons license.