Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
German

Translating step 2

Step 2
Remove the inner 4.9 mm T8 Torx screw securing each display hinge to the upper case (two screws total). Remove the inner 4.9 mm T8 Torx screw securing each display hinge to the upper case (two screws total).
  • Remove the inner 4.9 mm T8 Torx screw securing each display hinge to the upper case (two screws total).

Entferne die innere 4,9 mm T8 Torx Schraube, die jedes Displayscharnier am oberen Gehäuse befestigt (also insgesamt zwei Schrauben).

Your contributions are licensed under the open source Creative Commons license.