Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
German

Translating step 7

Step 7
Use the tip of a spudger to pry under the speaker cable connector, lifting it straight up from its socket. De-route the  cable from its notch in the logic board. De-route the  cable from its notch in the logic board.
  • Use the tip of a spudger to pry under the speaker cable connector, lifting it straight up from its socket.

  • De-route the cable from its notch in the logic board.

Hebele mit der Spudgerspitze unter dem Stecker des Lautsprecherkabels und ziehe ihn gerade aus seinem Anschluss heraus.

Hole das Kabel aus seinem Ausschnitt im Logic Board.

Your contributions are licensed under the open source Creative Commons license.