Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

Back to Guide
English
German
Next step

Translating step 1

Step 1
Remove the following screws from the optical drive side of the rear vent:

  • Remove the following screws from the optical drive side of the rear vent:

  • Two 10 mm T8 Torx

  • Two 5.2 mm Phillips

Entferne die folgenden Schrauben auf der Seite mit dem optischen Laufwerk am hinteren Lüftungsgitter:

Zwei 10 mm Torx T8 Schrauben

Zwei 5,2 mm Kreuzschlitzschrauben

Your contributions are licensed under the open source Creative Commons license.