Skip to main content
English
French

Translating step 2

Step 2
Draw any the shape you'd like your patch to be on a piece of paper. Be sure your design is at least 1/8" larger than the damaged area. Cut out your design.
  • Draw any the shape you'd like your patch to be on a piece of paper. Be sure your design is at least 1/8" larger than the damaged area.

  • Cut out your design.

Sur une feuille de papier, dessinez à main levée la forme qui va venir combler le trou. Elle doit être plus grande d’au moins 3 mm que la surface à couvrir. 

Découpez la forme.

Your contributions are licensed under the open source Creative Commons license.