Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
German

Translating step 13

Step 13
Remove the six 4.1 to 4.4 mm T6 Torx screws securing the logic board to the upper case.
  • Remove the six 4.1 to 4.4 mm T6 Torx screws securing the logic board to the upper case.

  • Remove the two 4.1 to 4.5 mm T6 Torx screws securing the MagSafe board to the upper case.

  • On some models, these screws may be T7. Be careful not to strip away the head with a smaller bit.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.