Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Spanish

Translating step 6

Step 6
Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board. Push the cable slightly to the right. Push the cable slightly to the right.
  • Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board.

  • Push the cable slightly to the right.

Usa la punta plana de un spudger para quitar el conector del cable del jack de conexión de auriculares de su zócalo en la placa lógica.

Empuja el cable ligeramente a la derecha.

Your contributions are licensed under the open source Creative Commons license.