Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
Spanish

Translating step 4

Step 4
Insert the tip of a spudger under the vibrator to free it from the adhesive holding it to the display assembly. Be careful not to immediately remove the vibrator, as its cable is also adhered to the rear of the display assembly. Use the tip of a spudger to pry the vibrator cable up from the display assembly.
  • Insert the tip of a spudger under the vibrator to free it from the adhesive holding it to the display assembly.

  • Be careful not to immediately remove the vibrator, as its cable is also adhered to the rear of the display assembly.

  • Use the tip of a spudger to pry the vibrator cable up from the display assembly.

  • Heat works as a great "persuader" here to soften the adhesive. Liberal application of heat from a heat gun will soften the adhesive. If you pry carefully, you can save and re-use the adhesive.

Inserta la punta de un spudger debajo del vibrador para liberarlo del adhesivo que lo sujeta al ensamblaje de la pantalla.

Ten cuidado de no remover inmediatamente el vibrador , ya que el cable está también adherido al la parte trasera del ensamblaje de pantalla.

Usa la punta de un spudger para levantar el cable del vibrador del ensamblaje de la pantalla.

El calor funciona como un persuasor aquí para ablandar el adhesivo. La aplicación liberal de calor desde una pistola de calor ablandará el adhesivo. Si haces palanca con cuidado, puedes salvar y reutilizar el adhesivo.

Your contributions are licensed under the open source Creative Commons license.