Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Italian

Translating step 3

Step 3
Use a pair of tweezers to pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac. On some iMacs this may not be a ribbon cable but four separate, very fine and very fragile wires. Be very careful, if the tweezers slip off the plug, you will very likely pull a wire out of the assembly.
  • Use a pair of tweezers to pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

  • On some iMacs this may not be a ribbon cable but four separate, very fine and very fragile wires. Be very careful, if the tweezers slip off the plug, you will very likely pull a wire out of the assembly.

Usa un paio di pinzette per tirare la piattina della sincronizzazione verticale fuori dalla sua sede sulla scheda di controllo del LED vicino all'angolo superiore sinistro del tuo iMac.

Su alcuni iMacs invece della piattina ci sono quattro cavi separati, molto fini e molto fragili. Stai molto attento perché se le pinze scivolano lungo la spina, è facile che un cavo fuoriesca dalla spina stessa.

Your contributions are licensed under the open source Creative Commons license.