Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
French

Translating step 1

Step 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board. Use the tip of a spudger to push each side of the power button cable connector and gently "walk" it out of its socket. Use the tip of a spudger to push each side of the power button cable connector and gently "walk" it out of its socket.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently "walk" it out of its socket.

Dans les étapes suivantes, vous serez amené à travailler près de la surface exposée de la carte d'alimentation. Évitez tout contact avec la surface de la carte d'alimentation. Les nombreux condensateurs soumis à une tension élevée présents sur la carte pourraient provoquer un choc électrique.

À l'aide de la pointe d'un spudger, poussez doucement chaque côté du connecteur du câble du bouton de mise sous tension pour débrancher le connecteur de sa prise.

Your contributions are licensed under the open source Creative Commons license.