Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Japanese

Translating step 20

Step 20
Use the tip of a spudger to flip up the metal retaining bracket on the display data cable. Carefully pull the display data cable from its socket on the logic board. Be sure to pull the display data cable connector straight out of its socket.
  • Use the tip of a spudger to flip up the metal retaining bracket on the display data cable.

  • Carefully pull the display data cable from its socket on the logic board.

  • Be sure to pull the display data cable connector straight out of its socket.

スパッジャーの先端を使って、ディスプレイデータケーブル上のメタル製固定ブラケットを裏返します。

丁寧にディスプレイデータケーブルを基板上のソケットから引っ張ります。

ディスプレイデーターケーブルのコネクターをソケットからまっすぐ引いてください。

Your contributions are licensed under the open source Creative Commons license.