Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 1

Step 1
Push the black tab at the bottom of the speaker to pop the speaker out of place, and remove the speaker. The speaker is spring loaded, so be sure to keep an eye on it in case it starts doing flips into the air when you push the tab.  Be careful not to lose or damage it!
  • Push the black tab at the bottom of the speaker to pop the speaker out of place, and remove the speaker.

  • The speaker is spring loaded, so be sure to keep an eye on it in case it starts doing flips into the air when you push the tab. Be careful not to lose or damage it!

  • Make sure the new/replacement speaker does not spring out during reassembly.

Poussez la languette noire au bas de l'enceinte pour faire sortir l'enceinte hors de sa place et retirez l'enceinte.

Le haut-parleur est à ressort, alors assurez-vous de le surveiller au cas où il commencerait à faire des flips en l'air lorsque vous poussez la languette. Attention à ne pas le perdre ou l'endommager!

Assurez-vous que l'enceinte neuve / de remplacement ne sort pas pendant le remontage.

Your contributions are licensed under the open source Creative Commons license.