Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 1

Step 1
Remove the power supply cable from its connector by pulling it parallel to the logic board. During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.
  • Remove the power supply cable from its connector by pulling it parallel to the logic board.

  • During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Retirez la nappe du bloc d'alimentation de son connecteur en la tirant parallèlement à la surface de la carte mère.

[* black] Remove the power supply cable from its connector by pulling it parallel to the logic board.
[* icon_reminder] During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Your contributions are licensed under the open source Creative Commons license.