Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
French

Translating step 5

Step 5
Remove the spring plate from behind the CPU heat sink. Lift and remove the backing plate from behind the CPU heat sink. The backing plate has two posts that fit into alignment holes in the logic board. Lift and remove the backing plate from behind the CPU heat sink. The backing plate has two posts that fit into alignment holes in the logic board.
  • Remove the spring plate from behind the CPU heat sink.

  • Lift and remove the backing plate from behind the CPU heat sink. The backing plate has two posts that fit into alignment holes in the logic board.

Retirez la plaque à ressort derrière le dissipateur thermique du CPU.

Soulevez et retirez la plaque de support derrière le dissipateur thermique du CPU. La plaque de support comporte deux bornes qui correspondent aux trous d'alignement dans la carte mère.

Your contributions are licensed under the open source Creative Commons license.