Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
French

Translating step 5

Step 5
The hard drive SATA cable can't be removed just yet, but will get in the way of removing the logic board. Pull the cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port. Pull the cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port.
  • The hard drive SATA cable can't be removed just yet, but will get in the way of removing the logic board.

  • Pull the cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port.

Le câble SATA du disque dur ne peut pas encore être retiré, même s'il est gênant pour retirer la carte mère.

Tirez le câble et le connecteur à travers le support droit du disque dur. Déplacez le câble vers le côté droit de l'iMac pour l'écarter de l'orifice d'échappement.

Your contributions are licensed under the open source Creative Commons license.