Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Japanese

Translating step 4

Step 4
Remove the following screws from the front of the logic board: Two 23.7 mm T10 screws
  • Remove the following screws from the front of the logic board:

  • Two 23.7 mm T10 screws

  • Four 7.4 mm T10 screws

  • One 20.8 mm T25 spacer screw

  • One captive T10 screw

  • This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

ロジックボードの前面から次のネジを外します。

23.7 mm T10ネジ 2本

7.4 mmのT10ネジ 4本

20.8 mm T25スペーサスねじ 1個

T10キャプティブスクリュー 1本

このネジはロジックボードの穴の下にあります。 固定ドライバまたはiFixitドライバキットから60 mmの延長が必要です。

Your contributions are licensed under the open source Creative Commons license.