Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
French

Translating step 4

Step 4
Remove the following screws from the front of the logic board: Two 23.7 mm T10 screws
  • Remove the following screws from the front of the logic board:

  • Two 23.7 mm T10 screws

  • Four 7.4 mm T10 screws

  • One 20.8 mm T25 spacer screw

  • One captive T10 screw

  • This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

Retirez les vis suivantes de la carte mère :

Deux vis T10 de 23,7 mm

Quatre vis T10 de 7,4 mm

Une vis d'entretoise T25 de 20,8 mm

Une vis T10 captive

Cette vis se trouve en dessous d'un trou dans la carte mère. Vous aurez besoin d'un tournevis adapté ou de l'extension de 60 mm d'un kit de tournevis iFixit pour l'atteindre.

Your contributions are licensed under the open source Creative Commons license.