Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
German

Translating step 4

Step 4
Remove the following screws from the front of the logic board: Two 23.7 mm T10 screws
  • Remove the following screws from the front of the logic board:

  • Two 23.7 mm T10 screws

  • Four 7.4 mm T10 screws

  • One 20.8 mm T25 spacer screw

  • One captive T10 screw

  • This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

Entferne folgende Schrauben von der Vorderseite der Hauptplatine:

Zwei 23,7 mm T10 Schrauben

Vier 7,4 mm T10 Schrauben

Einen 20,8 mm T25 Abstandshalter

Eine unverlierbare T10 Schraube

Diese Schraube befindet sich unter einem Loch in der Hauptplatine. Du benötigst einen festen Schraubendreher oder die 60 mm Verlängerung aus einem iFixit Schraubendreherkit, um dranzukommen.

Your contributions are licensed under the open source Creative Commons license.