Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Italian

Translating step 3

Step 3
Use the flat end of a spudger to disconnect the headphone jack cable connector from its socket on the logic board. Gently push the cable out of the way. Gently push the cable out of the way.
  • Use the flat end of a spudger to disconnect the headphone jack cable connector from its socket on the logic board.

  • Gently push the cable out of the way.

Usando la parte piana di uno spudger per sconnettere il cavo jack degli auricolari dal connettore sulla scheda logica.

Spostare con gentilezza il cavo in una posizione in cui non da fastidio.

Your contributions are licensed under the open source Creative Commons license.