Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

English
Italian

Translating step 2

Step 2
Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.
  • Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.

Rimuovi le due viti Torx T10 da 7,3 mm che fissano al case il supporto di sinistra del disco.

Your contributions are licensed under the open source Creative Commons license.