Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

English
French

Translating step 2

Step 2
Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.
  • Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.

Retirez les deux vis T10 7,3 mm par lesquelles le support gauche du disque dur est fixé au boîtier arrière.

Your contributions are licensed under the open source Creative Commons license.