Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

English
German

Translating step 2

Step 2
Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.
  • Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.

Entferne die beiden 7,3 mm T10 Schrauben, die die linke Festplattenhalterung am Gehäuse befestigen.

Your contributions are licensed under the open source Creative Commons license.