Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 43 guides that include this step.

English
Spanish

Translating step 22

Step 22
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

Tenga mucho cuidado de no tocar los cables del condensador ni las juntas de soldadura expuestas en la parte posterior de la fuente de alimentación (enmarcadas en rojo).

Si es necesario, se puede usar una tarjeta de plástico para cortar las secciones restantes de la tira adhesiva inferior.

Your contributions are licensed under the open source Creative Commons license.