Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 43 guides that include this step.

English
German

Translating step 22

Step 22
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

Berühre auf keinen Fall die Lötpunkte auf der Rückseite des Netzteils und die Zuleitungen der Kondensatoren. (Rote Markierung)

Wenn nötig, kann eine Plastikkarte helfen, den übriggebliebenen Kleber zu lösen.

Your contributions are licensed under the open source Creative Commons license.