Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 3

Step 3
Remove the two 5 mm Phillips screws securing the left speaker to the logic board assembly.
  • Remove the two 5 mm Phillips screws securing the left speaker to the logic board assembly.

  • If necessary, use a spudger to lift the microphone out of its housing in the left speaker.

ロジックボードアセンブリに左側スピーカーを固定している5mmプラスネジを2本外します。

必要であればスパッジャーを使って、左側スピーカーの筐体からマイクを持ち上げます。

Your contributions are licensed under the open source Creative Commons license.