Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Dutch

Translating step 10

Step 10
Remove the single 7 mm Phillips screw securing the display data cable retainer to the upper case. This screw may remain captive in the display data cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
  • Remove the single 7 mm Phillips screw securing the display data cable retainer to the upper case.

  • This screw may remain captive in the display data cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

  • Remove the display data cable retainer from the upper case.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.