Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 6

Step 6
Remove the two 1.5 mm Phillips screws securing the cable cover to the logic board. Lift the cable cover out of the upper case.
  • Remove the two 1.5 mm Phillips screws securing the cable cover to the logic board.

  • Lift the cable cover out of the upper case.

Entferne die beiden 1,5 mm Kreuzschlitzschrauben, mit denen die Kabelabdeckung am Logic Board befestigt ist.

Hebe die Kabelabdeckung aus dem oberen Gehäuse heraus.

Your contributions are licensed under the open source Creative Commons license.