Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 2

Step 2
Disconnect the camera cable by pulling the male end straight away from its socket.
  • Disconnect the camera cable by pulling the male end straight away from its socket.

  • Pull the connector parallel to the face of the logic board, not straight up.

Ziehe das Kamerakabel gerade aus seinem Anschluss auf dem Logic Board heraus.

Ziehe den Stecker parallel zur Oberfläche des Logic Boards, nicht senkrecht zu ihr.

Your contributions are licensed under the open source Creative Commons license.