All prerequisite guides must be translated before this translation is considered complete.
Accessing the engine compartment
Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
Communicate background information before the reader dives into the guide.
Step 1 — Remove the air filter housing
Using a screwdriver, loosen the two Torx T25 screws on the air filter cover.
Step 2 — Clear the air duct
Disconnect the oil vapour breather.
Step 3 — Cleaning the throttle valve
Spray brake or contact cleaner on the throttle and use a soaked paper towel to clean it until the body and edges are clean.
Step 4 — Refitting the airbox
Replace the pipe as far as it will go.
Step 5 — First restart
The first restart after cleaning is likely to fail and/or require many, many revolutions of the starter motor, even if the engine is warm!
Your contributions are licensed under the open source Creative Commons license.