Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Spanish

Translating step 12

Step 12
Carefully remove the logic board assembly from the upper case, minding any cables that may get caught. During reassembly:
  • Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.

  • During reassembly:

  • Keep loose cables clear of the board so they aren't caught under it.

  • Make sure the antenna cables are inserted into their respective notches, as highlighted in the second picture.

Cuidadosamente remueve la placa lógica de la carcasa superior, teniendo en cuenta cualquier cable que pueda quedar atrapado.

Durante el armado:

Mantén los cables sueltos alejados de la placa así no quedaran atrapados debajo de esta.

Asegúrate que los cables de la antena estén en sus respectivas muescas, como se resalta en la segunda imagen.

Your contributions are licensed under the open source Creative Commons license.