Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Spanish

Translating step 10

Step 10
Push the antenna cable retainer away slightly and remove the 3 mm T5 Torx screw securing the end of the heat sink to the upper case.
  • Push the antenna cable retainer away slightly and remove the 3 mm T5 Torx screw securing the end of the heat sink to the upper case.

Empuja el retenedor del cable de la antena un poco y remueva los tornillos 3 mm T5 Torx que sujetan el disipador de calor de la parte superior de la carcasa.

Your contributions are licensed under the open source Creative Commons license.