Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 27 guides that include this step.

English
Chinese

Translating step 3

Step 3
The following connector has an especially deep socket. Use care when disconnecting it. While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.
  • The following connector has an especially deep socket. Use care when disconnecting it.

  • While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.

  • Remove the I/O board cable.

以下排线座具有特别深的插座。请小心的把他断开

轻轻地将 I/O 板延长线向上挑起,则使用撬棒的平端撬动排线的侧面,以帮助将其从插座中拿出来。

拆下 I/O 板电缆。

Your contributions are licensed under the open source Creative Commons license.