Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 27 guides that include this step.

English
Italian

Translating step 3

Step 3
The following connector has an especially deep socket. Use care when disconnecting it. While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.
  • The following connector has an especially deep socket. Use care when disconnecting it.

  • While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.

  • Remove the I/O board cable.

Il seguente connettore ha una presa specialmente profonda. Presta attenzione quando lo scolleghi.

Mentre tiri delicatamente il cavo vicino alla sua presa sulla scheda madre, usa la parte piatta di uno spudger per far leva su entrambi i lati del connettore alternandoli per muoverlo man mano verso l'alto e scollegarlo.

Rimuovi il cavo della scheda I/O.

Your contributions are licensed under the open source Creative Commons license.