Skip to main content
English
Italian

Translating step 1

Step 1
Remove two T6 Torx screws from each side of the hard drive (four screws total). You'll need to transfer these screws to your new hard drive if you're changing drives.
  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

Rimuovi le due viti Torx T6 da ciascun lato del disco fisso (quattro viti in totale).

Se stai cambiando disco, devi trasferire queste viti sulla nuova unità.

Se stai installando un nuovo disco fisso, abbiamo una guida di installazione OS X per aiutarti a tornare rapidamente al lavoro.

Your contributions are licensed under the open source Creative Commons license.