Skip to main content
English
French

Translating step 1

Step 1
Remove two T6 Torx screws from each side of the hard drive (four screws total). You'll need to transfer these screws to your new hard drive if you're changing drives.
  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

Retirez les deux vis Torx T6 de chaque côté du disque dur (quatre vis au total).

Réutilisez ces vis pour le nouveau SSD.

Si vous le souhaitez, réutilisez la languette d'extraction pour votre nouveau lecteur.

Your contributions are licensed under the open source Creative Commons license.