Fix Your Stuff Community Store

Reemplazo de la tapa trasera de Steam Deck

Notice: You are editing a prerequisite guide. Any changes you make will affect all 33 guides that include this step.

Previous step Next step

Translating step 3

Back to Guide
English
Spanish
Step 3
Steam Deck Back Cover Replacement, Unclip the back cover: step 0, image 1 of 2 Steam Deck Back Cover Replacement, Unclip the back cover: step 0, image 2 of 2
Unclip the back cover

  • Insert an opening pick into the thin gap between the back cover and the front shell, along the edge of the right grip.

  • If you're having trouble inserting your pick at the grip seam, try starting at either the top or bottom long edges first, then slide the pick towards the grip.

  • Pry up on the back cover to release it from the locking clips.

Desengancha la tapa trasera

Inserta una púa de apertura en el delgado hueco entre la tapa trasera y la carcasa delantera, a lo largo del borde de la empuñadura derecha.

Si tienes problemas para insertar la púa en la costura de la empuñadura, intenta comenzar primero por los bordes largos superior o inferior y luego desliza la púa hacia la empuñadura.

Haz palanca en la tapa trasera para liberarla de los clips de bloqueo.

Your contributions are licensed under the open source Creative Commons license.