Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Dutch

Translating step 2

Step 2
Remove the six 6.9 mm screws as pictured with a T5 Torx screwdriver. Remove the single 9.8 mm screw next to the antenna on the back plate using a Phillips #00 screwdriver.
  • Remove the six 6.9 mm screws as pictured with a T5 Torx screwdriver.

  • Remove the single 9.8 mm screw next to the antenna on the back plate using a Phillips #00 screwdriver.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.