Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
French

Translating step 2

Step 2
Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver. Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver. Pull out the antenna.
  • Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver.

  • Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.

  • Pull out the antenna.

Dévissez six vis Torx noires de 6,9 mm avec un tournevis Torx T5.

Dévissez une vis d'antenne Phillips de 9,75 mm avec un tournevis Phillips # 00.

Retirez l'antenne.

[* red] Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver.
[* blue] Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.
[* black] Pull out the antenna.
[* black] Pull out the antenna.

Your contributions are licensed under the open source Creative Commons license.