Fix Your Stuff Community Store

Verwijderen van het koellichaam

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Previous step Next step

Translating step 3

Back to Guide
English
Dutch
Step 3
Heatsink Removal: step 0, image 1 of 1

  • The heatsink screws are very fragile and can be stripped or broken very easily. Proceed with caution and make a note of where each heatsink screw came out from.

  • Use a screwdriver to remove the following seven screws securing the heatsink:

  • Four 3.4 mm T5 Torx screws

  • Three 2.7 mm T3 Torx screws

Gebruik een schroevendraaier om de volgende zeven schroeven, waarmee het koellichaam is bevestigd, te verwijderen:

Vier 3.4 mm lange T5 Torx-schroeven

Drie 2.7 mm lange T3 Torx-schroeven

+[* icon_caution] The heatsink screws are very fragile and can be stripped or broken very easily. Proceed with caution and make a note of where each heatsink screw came out from.
[* black] Use a screwdriver to remove the following seven screws securing the heatsink:
[* red] Four 3.4 mm T5 Torx screws
[* orange] Three 2.7 mm T3 Torx screws

Your contributions are licensed under the open source Creative Commons license.